OEM Controller for MR340 Series Incremental Encoders
The MR340-0 PCB Controller enables Original Equipment Manufacturers (OEMs) to compactly and cost effectively integrate MR34X series Fber Optic Incremental Encoders within their own equipment designs.
In operation, the MR340-0 Controller sends two optical wavelength signals to a remote MR34X series Sensor. The encoder then modulates each optical beam based on the direction with a leading or lagging phase shift. The return optical signals are split into two separate beams and converted back into electrical signals by two photo diodes whose outputs are amplified by two gain-controlled amplifiers. A microprocessor supervises the amplitude of the optical signals and constantly adjusts the signal to provide a stable quadrature output.
The system has built-in diagnostics and can signal any anomaly occurring during sensor operation.
| Electrical Interface | |
| Connector |
16-pin ribbon cable receptacle, 3M N2516-5002-RB Recommended mating plug, 3M 89116-0103 |
| Quadrature Outputs | A+/A-/B+/B- RS422 line driver outputs, 100 kHz maximum bandwidth |
| Discrete Signals | ZERO Input, STATUS out, 5V logic |
| Serial Interface |
Modbus RTU or RS422/485 compatible, User settable baudrate: 9,600 to 115,200 Byte format: 1 Start Bit, 8 Data Bits, 1 Stop Bit, No Parity |
| Power Supply |
+5 VDC, 55mA typical, 100mA maximum Recommend 100mA power supply |
| Optical Interface | |
| Connector | LC Duplex |
| Fiber Type | Duplex 62.5/125μm, Graded Index Fiber, 0.275 NA, Type OM-1 |
| System Loss Budget | 10dB |
| Maximum Distance | Up to 1600 meters (5250 ft) with MR34X series Sensor |
| Environmental Attributes | |
| Temperature/Humidity | -5°C to +55°C (23°F to +131°F), 0-95% RH, Non-Condensing |
| Ingress Protection | IP30, keep free from contaminants |
| Physical Attributes | |
| Dimensions |
98.9 x 50.8 x 12.7 mm (3.5 x 2.0 x 0.50 inches) plus ≈61.0 mm (2.40 inch) connector clearance |
| Mounting | 4x #2-56 or M2.5 screws, mounting pattern 3.10 x 1.60 inches |
| Weight | 25g (0.9 oz) |
Specifications subject to change without notice
Call +61 (0) 7 5533 5367 or email info@qualityincontrol.com.au
| MR340-0 | OEM Controller |
| MR340-1 | DIN Rail Mount Controller |
| MR340-0 | OEM PCB Controller |
| MR340-1 | DIN Rail Mount Controller |
| MR341-E03C1R5 | Size 11 Rotary Encoder, 512ppr, Duplex LC Pigtail Length=1.5m |
| MR342-D06D00 | Size 58mm Encoder, 360ppr, IP-LC Interface |
| MR343-B400C05 | MRI Linear Sensor, Duplex LC Pigtail Length=5m |
| MR344-F38C1R5 | Hollow Shaft Encoder, Through Hole, IP54, 1024ppr, Pigtail Length=1.5m |
| MR344-F38PC1R5 | Hollow Shaft Encoder, Pocket Hole, IP66, 1024ppr, Pigtail Length=1.5m |
| MR345-F12D00 | Shaft Encoder, 1024ppr, IP-LC interface |
| MR346-D12D00 | Size 90mm Encoder, IP66, 360ppr, IP-LC InterfacePOF Sensor Cable, 5m |
| MR348-D06C05 | MRI Safe Size 58mm Encoder, 360ppr, Duplex LC Pigtail Length=5m |
